Lucent Marcons - Engineered Products & Solutions for Niche Markets

Combustion Control & monitoring

Our Combustion products includes Flame Scanners, Igniters, Retractors, Burner Controls that have been applied to thousands of power and industrial boilers worldwide. Variety of UV & IR flame scanners that accurately detect the presence or absence of flame in a combustion chamber and some provide both self-check and non-self-check capabilities. Our Igniters provide the ignition energy to ignite the main fuel for utility and large industrial steam generators. Lucent provides a complete line of oil and natural gas igniters for all burner types.

YOUR COMBUSTION CONTROL SPECIALISTS
100% commitment to quality products and solutions for flame safety. Accurate, reliable flame monitoring is critical for burner safety and Fireye® has been delivering the industry's best and most dependable flame safeguard controls & burner management system for commercial & Industrial application for more than 80 years. Reliable quality and unmatched technical service sets Fireye apart from the competition.
First to develop infrared scanners to monitor both gas and oil flames, the first to develop a scanner that discriminated between signals from adjacent burners, the first to create a completely solid-state programming control. We have set new standards with a micro-processor-based, auto diagnostics program that communicates in five different languages.

Forney’s flame detectors are used world-wide to prove the presence and absence of flames in utility or industrial boilers firing solid, liquid or gaseous fuels.
We pay equal attention towards achieving unhindered process by ensuring device is reliable & intelligent enough to detect flame off when actually flame is off, this saves processes from faulty trips.

Fireye offers entire range of product including Infra Red, Ultra Violet or covering Visible range with both

integrated and discrete versions that safeguards very simple burners to a high end application that addresses entire industry segment including public buildings, Commercial Properties, Power Plants, Refineries, Steel, Fertilizers, Cement, Steel, Pulp and Paper Mills, Petrochemical Facilities and Food Processing Plants etc.

Flame Scanner

InSight II

*  Integrated design includes internal flame relay and 4-20mA output
*  Keypad/display for programming
*  Remote communications and file select capabilities
*  Programmable flame flicker frequency, sensor gain, pull-in and drop-out setpoints, and FFRT
*  InSight II is a dual cell scanner utilizing UV and IR detector
*  Standard features include two independently adjustable Flame Relays that can be selected to operate from the UV sensor, the IR sensor, or both sensors

PARAGON

Type 105F1-1 Integrated Flame Scanner and Temperature Analyzer. Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learned vs. Stored Curve Fitting.

95IR / 95UV / 95DS INSIGHT SCANNERS

Integrated design includes internal flame relay and 4-20mA output Keypad/display for programming Remote communications and file select capabilities Programmable flame flicker frequency, sensor gain, pull-in and drop-out setpoints, and FFRT InSight II is a dual cell scanner utilizing UV and IR detector Standard features include two independently adjustable Flame Relays that can be selected to operate from the UV sensor, the IR sensor, or both sensors.

PHOENIX 85UVF SCANNERS

Automatic flame characterization Optimum gain and flicker frequency Detection Fully automatic programming Easy Installation Streamlined user interface, simplifies Operation Flame learn cycle completes in less than one minute flame characterized in less than one minute.

SIMPLICITY SCANNERS

Fully integrated design - a true one piece system No programming, minimal setting up, “out of the box” operation Superb detection, sensitivity and wide angle of view Field proven and reliable technology Worldwide safety agency approvals Rugged NEMA 4X (IP66) housing Truly economical solution.

Integrated Design Scanners 45FS1/45UVFS1 SIGNATURE SCANNERS™

Patented flame detection method that “learns the signature” of 3 different fuels Keypad/display for programming or learning flame information Remote communications capability Remote file select capability.

45RM4

16 position frequency selector switch Gain adjustment potentiometer 10 LED flame strength indicator.

48PT2

The 48PT2 lead sulfide infrared scanner contains a low impedance detector and is designed to detect low flicker frequency IR signals from gas and oil flames. It is designed for use on DSeries, Flame-Monitor, FlameWorx and MicroM controls.

Controls 25SU3-2000/2100/2150

Euro-rack design Keypad programmable Displays actual flame signal pulses from 2 independent flame scanners Programmable scanner logic Programmable pull-in, drop-out, and marginal alarm setpoints Selectable FFRT (1 to 6 seconds).

IDD Detector Series

Designed to accurately detect & discriminate the luminous flames that fuel oil, coal and lignite fuels create's, the IDD-II Flame Detector is used for light fuel oil flame sensing and is also designed specifically for the low flame frequency produced by high ash flames & lignite.

IDD 9000 Amplifier

Panel Mounted Flame Detector Amplifier provides advanced flame signal analysis and tuning capabilities to meet new challenges of today's market place. A flame detector amplifier for utility and industrial boilers with output contacts that make it a popular choice for multi burner applications. The Forney IDD series flame detector amplifier is available as a panel or rack mount and is suitable for coal, oil or natural gas being compatible with a variety of gas applications. The detector outputs an analogue signal with a multitude of frequencies when viewing a flame. The amplifier after receiving the signal is able to select one of many discrete frequencies which best represents the "flame on" condition.

Uniflame II - Unitised Flame Detector with built in Amplifier

A combination of solid state infrared, ultraviolet or dual (IR and UV) sensors are utilised in the Uniflame series flame detectors that are based on microprocessor technology. These can be applied to solid, liquid or combination fuel firing. It also incorporates an adjustable flame relay to eliminate the requirement of a remote signal amplifier.

IGNITERS

HESI IGNITER

The HESI igniter is a Class 3 Igniter used for direct spark ignition of oil or gas igniters, small burners, and combustion turbines. The Standard HESI is FM approved and the CE Version meets the Low Voltage Directive and Electromagnetic Interference Immunity Directive..

MAXFire® Gas Igniter

The MAXFire® 100 Series gas igniter incorporates the “protected primary combustion zone” design in each of the 5 capacities available. The ignition process starts inside the guide tube away from the burner environment resulting in an extremely stable and reliable igniter. Capacities (nominal) range from Class 1, 2 or 3 Gas Igniter Capacity range from 0.3 to 50 Maxfire Gas IgniterMBtu/hr. The Forney MAXFire® gas igniter provides stable and reliable operation in a size and capacity range from 2" OD, 1 mmBtu/hr to 5" OD 35 mmBtu/hr for use in wall burners.

DURAFIRE® OIL IGNITER

The Forney DURAFire® is the only oil igniter on the market to incorporate a highly stable and reliable “protected primary combustion zone”. Capacities range from 5 to 30 mmBtu/hr for use in wall burners.

COAL MONITORING SYSTEMS / CPDS

Coal Pre-ignition Detection System (CPDS)

Forney designs early warning systems for the continuous monitoring of potential fires in coal processing, transportation and storage.

Highly skilled representatives, offer customers a level of expertise and technical troubleshooting that can keep their systems operating at peak performance.
Our salespeople are well versed in the technologies and engineering of our products, as well as commercial and industrial applications. They will be happy to discuss your application needs in detail and to suggest to you the Fireye control or system that can best meet your system requirements.

Duct Burners

Forney Duct Burners provide the latest designs in duct burner technology for cogeneration and combined cycle power plants. Our range of burners provide clean combustion for supplemental firing of turbine exhaust gas, as well as fresh air and other process streams. Forney has over hundreds of units installed worldwide.
ADVANTAGE® DUCT BURNER
Best duct burner for low oxygen / high water applications when supplemental firing Turbine Exhaust Gas (TEG) or where Forney’s Duct Burners provide superior performance in combined-cycle and cogeneration applications. Our supplemental firing history dates back to the 1960’s and has expanded to the variety of products we offer today.